1325 Red Dot Position crafts CO2 Laser Engraving Cutting Machine With Large Working Area
Features:
1. CO2 laser tube.
CO2 laser tube power available:60w, 80w, 100w, 130w, 150w, 180w.
For engraving, 60w and 80w are good choices. 80w and above are mainly for cutting
2. Blade worktable
It is suitable for hard materials, such as acrylic, wood and so on.
3. Honeycomb worktable.
Honeycomb worktable for soft materials such as cloth,fabric and so on.
4. RD workers.
DSP control, LCD panel with E-Stop and KeySwitch.
5. Exhaust fan and wind pipe.
It creates an air flow to remove dust and fumes from the work area of the laser machine.
6. Water chiller.
S&A,best in china,it is used to cool the laser tube.
7. Air pump.
(1). Push fumes away from the laser's focal lens to protects the lens from contaminants which could
destroy the lens.
(2). Push air into the material's kerf as created by the laser beam, will remove debris/fumes and allow
the laser light to penetrate deeper through the material
Technical parameters:
| Machine model | 1325 laser machine |
| Laser type | Sealed CO2 laser tube, wavelenght:10:64μm |
| Laser power | 40W/60W/80W/100W |
| Cooling mode | Circulating water cooling |
| Laser power control | 0-100% software control |
| Control system | DSP offline control system |
| Max. engraving speed | 60000mm/min |
| Max cutting speed | 50000mm/min |
| Repetition accuracy | ≤±0.01mm |
| Min. Letter | Chinese:1.5mm, English:1mm |
| Table size | 1300*2500mm |
| Working voltage | 110V/220V.50-60HZ |
| Working conditions | temperature:0-45℃,humidity:5%-95% |
| Control software language | English/Chinese |
| File formats | *.plt,*.dst,*.dxf,*.bmp,*.dwg,*.ai,*.las,*.doc |
Application :
FAQ :
Q1. How to get the most suitable machine?
A:Please tell me
1.What is the material you want to working on?
2. How to working on it ? Engraving ? Cutting ? Or other
3. What’s the MAX size of these material ?( length ? Width ? Thickness ?)
Then we can recommend a suitable machine for you.
Q2: Do you have the manual of machine?
A:Yes,we have, both electric and paper ones.
Q3 . What's the service I can get if I buy your machine?
A:1. Two year guarantee for whole machine except of laser tube and lens ( 3 months )
2. 24 hours technical support by e-mail, calling or door-to-door service
3.We will provide the consumable parts at an agency price when you need replacement
4. Machine has been adjusted and tested before delivery
